Pressure Transmitter

  • Three settable working ranges for each model 100/300/500Pa
  • Output signal 0 – 10V
  • High level of accuracy and stability
  • Models with square root output signal
  • Quick and easy mounting
Select Available Next Day

SKU: 149-DCV-DPT150

26 in stock

Quantity

Got a question about this product?

Email us or call us on +44 (0) 1384 275800

Overview

DPT is a transmitter for use with our Demand Control Ventilation system for measuring differential pressure in air and neutral gases for controlling pressure in HVAC systems.

Features and Benefits

Function

The transmitter consists of a plastic sensor-housing and a membrane of silicon LSR. The differential pressure affects the membrane which is connected to the sensor element. The element is manufactured with state-of-the art technology with a ceramic beam onto which thick-film resistors have been applied. The pressure on the membrane causes a movement which is transferred to the ceramic beam. Flexing of the beam gives changes in resistance. The changes in resistance are transmitted by means of built-in electronics to an analogue output signal. The measuring element gives a rapid response and a high level of accuracy. The properties of the ceramic element ensure that the transmitter has excellent long-term stability.

Sensor Housing

The sensor housing is made of transparent plastic. The cable input is on the left hand side with cable gland. The cover is closed by a single screw and can easily be detached from the hinges when mounting.

Setting the Working Range

The transmitter has three different working ranges depending on the model. The working ranges are set via two dip switches in the lower left corner of the circuit board according to the table shown below. The supply voltage must be disconnected. You can also change the zero point of the pressure measurement by pressing the button above the dip switches.

Mounting

The sensor should be mounted vertically using screws in the mounting holes on the back edge. There are also two mounting holes on the upper side of the sensor housing.

Connection Set

A connection set consisting of tubing and pressure outlets can be supplied as accessory to DPT.

Customers Also Viewed

IP66 Eltadrive Variable Speed Drives
Options Available

IP66 Eltadrive Variable Speed Drives

PIR Sensor PIR Sensor

PIR Sensor

Air Proving Switch Air Proving Switch

Air Proving Switch

Airflow Fault Monitor

Airflow Fault Monitor